G-zog N300V5-A LED zaub fais fab mov
Khoom Main Specification
| Tso zis zog (W) | Rated Input Qhov hluav taws xob (Vac) | Rated Tso zis Qhov voltage (Vdc) | Tso zis tam sim no Ntau yam (A) | Precision | Ripple thiab Suab nrov (mVp-p) |
| 300 | 200-240 Nws | +5.0 | 0-60.0 Nws | ± 2% | ≤150 |
Ib puag ncig xwm txheej
| Yam khoom | SPECIFICATION | UNIT | Nco tseg |
| Ua hauj lwm kub | -30 ~ + 60 | ℃ |
|
| KEV KHO SIAB | -40 ~ +80 | ℃ |
|
| QHOV TSEEB | 10 ~ 60 | % |
|
| TSEEM CEEB | nws tus kheej txias |
|
|
| ATMOSPHERIC TSHUAB | 80 ~ 106 ib | Kpa |
|
| NTAU TSHAJ PLAWS SEA LEVEL | 2000 | m |
Hluav taws xob yam ntxwv
1) Cov yam ntxwv nkag
| NO | Yam khoom | SPECIFICATION | UNIT | Nco tseg |
| 1.1 | NYIAJ VOLTAGE | 200 ~ 240 hli | Vac |
|
| 1.2 | QHOV TSEEB FREQUENCY | 47-63 : kuv | Hz |
|
| 1.3 | Ua tau zoo | ≥80 (Vin = 220Vac) | % | full-load tso zis nyob rau hauv ib txwm kub |
| 1.5 | Hwj chim FACTOR | ≥0.52 |
| full-load output nyob rau hauv rated input voltage |
| 1.6 | MAX input tam sim no | ≤ 3.0 | A |
|
| 1.7 | PIB SURGE CURRENT | ≤ 60 | A | kuaj lub xeev txias |
2) Cov yam ntxwv tso zis
| NO | Yam khoom | SPECIFICATION | UNIT | Nco tseg |
| 2.1 | Rated tso zis VOLTAGE | +5 | Vdc |
|
| 2.2 | NTAWM CURRENT | 0 ~ 60.0 | A |
|
| 2.3 | VOLTAGE ADJ RANGE | 4.6 ~ 5.4 hli | Vdc |
|
| 2.4 | VOLTAGE REGULATION RATE | ± 1% | Vo | Meanwhile sim nyob rau hauv lub teeb load, ib nrab load, tag nrho load tsis sib tov |
| 2.5 | LOAD REGULATION RATE | ± 1% | Vo | |
| 2.6 | VOLTAGE REGULATION ACCURACY | ± 2% | Vo | |
| 2.7 | RIPPLE & NOISE | ≤150 | mV-p | rated input, tag nrho load tso zis, 20MHz bandwidth, 47μF capacitor paralleled nyob rau hauv load kawg |
| 2.8 | BOOT OUTPUT DELAY | ≤3000 | ms |
|
| 2.9 | TSO RAU SIJ HAWM | ≥10 | ms | Vin = 220Vac test |
| 2.1 | TIV THAIV VOLTAGE RISE PERIOD | ≤ 50 | ms |
|
| 2.11 | SWITCHING OVERSHOOT | ± 5% | Vo | kuaj mob: tag nrho load, hom CR |
| 2.12 | DYNAMIC OUTPUT | Kev hloov hluav taws xob tsawg dua + 5% VO ； Dynamic teb lub sijhawm ≤250us | Vo | Load 25% -50%, 50% -75% |
3) Cov yam ntxwv tiv thaiv
| NO | Yam khoom | SPECIFICATION | UNIT | Nco tseg |
| 3.1 | NYIAJ RAU HAUV VOLTAGE PROTECTION | 140-175 : kuv | Vac | Kuaj mob: tag nrho load |
| 3.2 | NYIAJ RAU HAUV VOLTAGE PROTECTION POINT | 160-180 : kuv | Vac | |
| 3.2 | TOM QAB TAM SIM NO TXOJ CAI TXOJ CAI | 66-90 : kuv | A | HI-CUP burp tus kheej rov qab, zam lub zog puas tsuaj ntev tom qab luv luv Circuit Court |
| 3.3 | TXOJ CAI TSHUAJ TIV THAIV KEV KHO MOB | 60.0 Nws | A |
Nco tseg: Thaum muaj kev tiv thaiv tshwm sim, kaw lub kaw lus.Thaum lub hwj chim rov qab, txiav nws tawm tsawg kawg 2 vib nas this, thiab tom qab ntawd muab tso rau, lub hwj chim rov pib dua.
4) Lwm yam ntxwv
| NO | Yam khoom | SPECIFICATION | UNIT | Nco tseg |
| 4.1 | MTBF | ≥40,000 | H |
|
| 4.2 | TXOJ CAI TSHIAB | 1.0mA (Vin = 220Vac) | GB8898-2001 9.1.1 test method | |
Yam ntxwv kev nyab xeeb
| Yam khoom | Kev piav qhia | Tech Spec | Lus ceeb toom | |
| 1 | Hluav taws xob muaj zog | Input rau cov zis | 3000VAC / 10mA / 1min | Tsis muaj arcing, tsis tawg |
| 2 | Hluav taws xob muaj zog | Nkag mus rau hauv av | 1500VAC / 10mA / 1min | Tsis muaj arcing, tsis tawg |
| 3 | Hluav taws xob muaj zog | Tso zis rau hauv av | 500VAC / 10mA / 1min | Tsis muaj arcing, tsis tawg |
Cov ntaub ntawv txheeb ze Curve
Input voltage vs Load Cua urve
Kub vs Load Curve
Efficiency vs Load Curve
Mechanical Characteristics & Connector Txhais (Unit: mm)
1) Lub cev Dimension L * W * H = 212 × 81.5 × 30.5 ± 0.5
2) Txhim kho qhov ntsuas
Nco tseg:
Tsau ntsia hlau specification yog M3, tag nrho ntawm6.Cov ntsia hlau ruaj rau hauv cov khoom siv hluav taws xob tsis tuaj yeem ntev dua 3.5mm.
Daim ntawv ceeb toom kev nyab xeeb
1) Hauv kev teeb tsa, lub zog yuav tsum muaj kev nyab xeeb thiab muaj kev nyab xeeb, kev nyab xeeb ntawm cov hlau ncej hauv txhua sab Yuav tsum yog ≧8mm.Yog tias nws tsawg dua 8 hli, PVC gasket thickness ≧1 hli yuav tsum tau los txhawb kev rwb thaiv tsev.
2) Kev sib txuas ncaj qha rau lub phaj txias ntawm tes yog txwv tsis pub.
3) Lub taub hau taub yog ≦8mm thaum txhim kho PCB phaj.
4) Xav tau ib lub lev sab nraum L285mm * W130mm * H3mm txhuas raws li ib tug auxiliary hea
